Smart zoned heating gives every room its own temperature and schedule. Professionally installed, remotely monitored – delivering typically 30%, or even up to 40% reductions in gas consumption in some old, larger properties.
Traditional: all rooms heated equally. Up to 60% of heat is wasted.
Larger homes in Bearsden and Milngavie can spend £3,000–£5,000 annually on gas. Much of that heats empty rooms all day and night.
The hallway thermostat reads 21°C but bedrooms are too warm and the living room's still cold. Every room has different needs.
You can set on/off times for the whole house, but not per room. The spare bedroom gets the same heating as the kitchen at dinner time.
You've no idea which rooms are using the most energy. Without data, you can't make smart decisions about your heating.
“We cut consumption by 40% before Ukraine sent prices soaring. At today’s rates that saves ~£990/yr. But if prices spike to 2023 levels again, that same reduction saves ~£1,900/yr. The price protection is worth roughly as much as the saving we’re already getting.”
Based on 5 full years of verified billing data (2021–2025). Pre-install baseline: 40,897 kWh (2021). Post-install: 24,292 kWh (2025 actual). Saving = 16,606 kWh (2025). All £ figures = 16,606 kWh × the average unit rate for that year: 2.67p (2020), 11.48p (2023 avg), 5.95p (2025 avg). Source: Gas_Consumption_History_v8.xlsx, Annual Summary.
We assess your property, confirm boiler compatibility, and design the zone layout. No obligation, no cost.
Existing radiator valves are swapped for smart TRVs. No pipework. No draining. No mess.
The control hub links to your boiler using existing wiring and joins your WiFi. No cable runs. No floorboards lifted.
We configure every zone schedule, test every valve, and hand over a fully optimised system. Typically all done in one day.